Gefran - F028340 40B 96 5 10 RR R0 2 0 0 INDICATOR

The Gefran 40B-96-5-10-RR-R0-2-0-0 indicator is for force, pressure and displacement transducer indicator with input for strain-gauge or potentiometer.

Gefran 40B-96-5-10-RR-R0-2-0-0 position, force and pressure indicator

The Gefran 40B-96-5-10-RR-R0-2-0-0 have a maximum of 4 outputs that can be mechanical relays or logic outputs.

• 5 digits
• 3 relay outputs
• Transmission power supply 10Volts dc
• 0/4 to 20mA (0 to 10V) retansmision output
• power supply  11 to 27 Volt ac/dc
• Strain-gauge or potentiometer input
• Main applications; Extrusion lines, Rubber presses, Test benches, Lapping machines, Food processing equipment, Weighing, Pressure trips, Position, Motors and potentiometer
• Gefran 40B-96-5-10-RR-R0-2-0-0

96x48 (1/8 DIN) formats manufactured with SMT.
The Gefran 40B-96-5-10-RR-R0-2-0-0 have a lexan membrane faceplate (guaranteed to IP65) which has 3 keys, a 5 digit display and 4 indicating LED´s for the output statuses.
The input signal can be selected from a wide range of sensors:

• Potentiometer (minimum 100W)
• Load cell with sensitivity autoranging between 1,5 and 3,3mV/V
• Strain-gauge pressure sensor

The selection is made using the faceplate keys.
A digital input (24Vdc/5mA) is available for resetting, hold, flash, peak handling or releasing latch.
One output of 0/4 to 20mA (max. 500W) is available for retransmitting the measured input signal.
The retransmission output, the digital input and the third output are options available contemporaneously.
Finally, a triac can be fitted to drive resistive loads up to a maximum of 1A at 240V.
The Gefran 40B-96-5-10-RR-R0-2-0-0 programming of the instrument is made easy by grouping the parameters in function blocks (CFG for the alarm hysteresis, Inp for the inputs, Out for the outputs...) and by a simplified data entry menu.

The configuration can be simplified even further using the PC programming kit made up of a connection cable and a menu guide program that runs under Windows (data sheet cod. GF_eXpress).
A configurable personal software protection code (password protection) can be used to restrict the levels of editing and displaying the configuration parameters.

Force, pressure and displacement transducer indicator with input for strain-gauge or potentiometer