WAGO - 759-302/000-923 I/O-CHECK, USB-Kit, CD ROM, WINDOWS 7, 10

WAGO-I/O-CHECK, USB-Kit, CD ROM, WINDOWS 7, 10

WAGO-I/O-CHECK USB kit is an easy-to-use Windows application for operating and displaying a WAGO I/O System 750's node without connecting to a fieldbus system. This versatile software reads the configuration from the node and displays it graphically on the screen which can be printed together with a configuration list.

With this USB kit, it is possible to display and specify the process data of the I/O modules. The field wiring, including all sensors and actuators can be checked before start-up. For some types of interface Pt100 and thermocouple modules, application-specific settings can be made, such as the baud rate or sensor types.

The coupler must be connected to a free serial or USB port of the PC using the communication cable supplied to enable communication between WAGO-I/O-CHECK and the node.

WAGO I/O Check USB Kit Features

• Supported operating systems - Windows 7, Windows 10
• Processor - 1 GHz or higher, with 32 bits (x86) or 64 bits (x64)
• Memory Min. - 1 GB RAM 2 GB RAM or more (recommended)
• Hard disk space min.- 150 MB
• Graphics resolution - 1024 x 786 (min.), 1280 x 1024 or higher (recommended)
• CD ROM