GE - MM200XXHSS MOTOR PROTECTION RELAY, MONITORING, CONTROL UNIT, FORM A/C, LOW VOLTAGE, DIGITAL, 7X24VDC, 60-300VAC, 3 PHASE, RS485

Digital Low Voltage Motor Protection and Control System Relay

The Multilin MM200 is a dependable digital motor protection and control system, designed for low voltage motor applications integrating protection, control and multiple communication protocols in a rugged device. Compact and powerful, the MM200’s protection can be scaled to the specific requirements of your system.

Advanced protection and control including - undercurrent and current unbalance, acceleration time, ground fault and built-in starter logic. Metering and monitoring functions include current, motor loads, thermal capacity and motor run time. This motor starter utilises advanced communications technologies making it easier to use and integrate into new and existing infrastructures.

The MM200 performs comprehensive device health diagnostic tests during start-up and continuously during runtime to test its own major functions and critical hardware. With 10 digital counters to aid in system analysis, the counters can be used for scheduling inspection of equipment and performing qualitative analysis of system problems and trend spotting.

Typical industrial applications include - Low Voltage Three-Phase Motors, IEC and NEMA Motor Control Centers (MCCs), Process control applications, System architecture requiring multiple simultaneous communications, Full Voltage Non-Reversing (FVNR) & Full Voltage Reversing (FVR).

When used with EnerVista Software, which is an industry leading set of programs designed to function with the MM200, this simplifies use and provides all the tools required to monitor the status of valuable industrial process and control assets.

MM200 Digital Motor Controller Features

• low voltage motor protection and control applications
• Power Supply low range – 18-23 VDC, High range 60 – 300 VAC
• Digital inputs - 7 x 24 VDC inputs (wet)
• Outputs 2 x Form A and 1 x Form C, 5 Amps at 240 VAC
• 3 Phase CT Inputs
• Small footprint designed for IEC and NEMA MCC applications
• Integrated pushbuttons and 12 LED indicators
• RS485 and Thermistor input (optional ProfiBus and DeviceNet)
• Flexible DIN rail mounting
• Optional control panel provides local control
• Universal device for all motor power ratings
• No CTs required for less than 5A motor ratings
• Support for dedicated Hand-Held Display
• Dimensions HxWxD – 90 x 78.7 x 112.7 mm