T.I.S. - TIS 600 SAFETYPAT PLUS PORTABLE APPLIANCE TESTER MANUAL

The TIS 600 Safety PAT Plus Portable Appliance Tester stores 300 Test Results and can be battery & mains powered. This capable PAT tester is capable of testing surge protected equipment & can test 110V, 230V & 415V appliances. The TIS 600 Safety Test Unit will return true leakage results at both 110V and 230V respectively.

Features & Benefits

• Stores up to 300 complete test results
  
• Simple and extremely easy to use
  
• Battery and mains powered, using 12V DC adapter (not included)
  
• Indicates if the appliance is switched on or not during the test
  
• 250V and 500V insulation
  
• Surge protected equipment can be tested
  
• Test 110V, 230V and 415V (110V and 415V optional adaptors)
  
• Large LCD Display
  
• All tests timed out at 5 seconds in line with HSE guidance
  
• Auto Power Off
  
• Results held on display to allow them to be noted
  
• Complete with 12 months calibration certificate
  
• Indicates results with a Pass / Fail indication
  
• Indicates results with actual reading AND pass / fail
  
• Will test equipment that does not conform to EN60950
  
• Complete with soft, padded carrying case & neck strap
  
• Clear, precise testing procedures
  
• Single press of a button from start to finish of test
  
• Complete with test leads, probes and earth clip
  
• Up to 3* years warranty
  
• Auto saving of results
  
• Tests long extension leads up to 0.50

Tests performed

• Earth Continuity Test upto 0.5O
  
• Insulation test at 250V and 500V
  
• True reading of leakage at 110V
  
• True reading of leakage at 230V
  
• Class I earthed appliances
  
• Class II double insulated appliances
  
• IT Test, computer equipment etc
  
• Tests at 110V, 230V & 415V (with optional adaptors)
  
• Tests akk surge protected equipment
  
• Tests mains sockets & indicates fault situations
  
• Earth leakage tests 0-0.75mA, 0-3.50mA
  
• Tests polarity and indicates fault situations
  
• IEC cord test
  
• Extension leads upto 0.5O (most other testers will only test upto 0.2O)
  
• Results displayed in actual results AND pass/ fail
  
• All tests carried out automatically from the press of one button