Danfoss Heating - 013G0149 RADIATOR VALVE, ANGLED BODY, RA-FN, FIXED CAPACITY, DN 15, 2 PIPE SYSTEM, 10 BAR, ½ INCH, 15MM, REQUIRES TRV

Radiator Valve, Angled Body, RA-FN, DN 15, 2 Pipe System, 10 Bar

The RA-FN 15 radiator angled valve bodies are used in two-pipe heating systems and are robustly manufactured from brass with nickel plating. The pressure pin of the gland seal is of chromium steel and works in a lifetime lubricated O-ring seal. Easy to use, the complete gland assembly can be replaced without draining down the system.

The valves are supplied with a grey protective cap, which can be used for manual regulation during the construction phase. The protective cap must not be used as a manual shut off device. A special manual shut off device should be used. A TRV head is not included and must be purchased separately, search 013G2910, 013G29900 and 013G291600, or view the range here.

To avoid deposition and corrosion, the composition of the hot water must be in accordance with the VDI 2035 guideline. It is recommended that formulations containing mineral oil are avoided. All RA-FN valve bodies can be used together with all types of thermostatic elements in the Danfoss RA2000 series.

Radiator Angled Valve Features

• 2 Pipe System
• Valve Size DN15
• Type – RA-FN 15, Fixed Capacity
• Working pressure 10 Bar
• 0.6 Bar differential pressure range
• Maximum flow temperature - 120 °C
• Normal flow valve without presetting
• Connection size inlet Rp 1/2, outlet R 1/2 Internal thread (15mm)
• Test pressure – 16 Bar