Lascar - EMV 1200 2 WIRE LCD VOLTMETER, SINGLE HOLE MOUNTING, 3 DIGIT, 4- 25VDC RANGE

EMV 1200 2-Wire LCD Voltmeter with Single-Hole Mounting

The EMV 1200 LCD Voltmeter from Lascar is simplicity itself to use and to install featuring a 3 digit 12.5mm high display a low-profile house and two wires for connecting to the monitored voltage source. To install the EMV 1200 simply drill a 5.5mm hole through your control panel face, pass the rear threaded stud of the display through the hole and tighten with the provided nut and washer and connect. Only valid readings are displayed during operation and when voltages go below 4V the reading indicates ?LO? and when above 25V the reading indicates ?HI?.

This practical display module features a 4V to 25V measuring range with 100 mV resolution and the LCD display obtains its power from the voltage it is reading. The EMV 1200 features a rubber seal and provides splash-proof protection when fitted between the meter and mounting panel. 

The EMV 1200 LCD Voltmeter is suitable for a wide variety of applications including power supply monitoring, precision instrumentation systems and panel mount indication.

EMV 1200 2-Wire LCD Voltmeter Features:

• 2 Wire operation
• Voltage measuring range 4 to 25V dc full scale reading
• Accuracy 0.2V (±1 count)
• Operating temperature range 0 to 50°C (32 to 122°F)
• Reverse polarity protection
• Sample rate 3 samples per second
• Supply voltage 3V to 50V dc
• Supply current 3mA
• Dimensions 21x44x5.5mm