Baumer - PL20H-11111.133012.A03021030030 POINT LEVEL SENSOR, ADAPTIVE TRIGGER, RA < 0.8uM, EPDM O-RING, PNP, G 1/2 A, M12-A, 4-PIN, STAINLESS STEEL KINGCROWN, BAUMER PROTECT+ IP69K

Level Sensor, EPDM Sealing, PNP Output, 10 Bar

This CleverLevel Level Sensor is feature packed, with an adaptive trigger, EPDM sealing, PNP output, a G1/2 process fitting and IO-link it is ready for anything. Whatever the media, liquid, paste-like, sticky, or granular, this sensor has been designed to recognise them and self-adjust its parameters to suit, saving you setup time while maintaining a high-degree of process safety, up-time, and stability. This versatile level sensor is easily integrated into Industry 4.0 Smart Factory installations.

With the built in 360° multicolour LED switching state indicator, the status is always visible to the operator. The sensors compact design and very short media immersion length means they are minimally invasive, easy to clean and offer greater flexibility when installing. EPDM seals provide high resistance to water, steam glycol, alcohols, acids, lye and solvents and chemicals used in food and beverage production, not suitable for mineral oils.

The CleverLevel Level Detector Range

The CleverLevel level PL20 range of level switches are the ideal solution to the level sensing challenges in applications in the processing industry, from media detection in tubes and pipes to overfill protection of tanks and leakage detection. These adaptive sensors are the perfect universal level switch for all media. With pasty materials, which can adhere to the sensor face, these capable level detector sensors continue to automatically adjust the switching level without the need for any manual setting-up and parameterisation.

The flexibility and integration of the PL20 level sensor range is enhanced by the large selection of process connections and adapters. The IO-link interface supports both continuous communication for simplified control and commissioning of the sensors.

CleverLevel Level Detector Features

• Adaptive trigger
• Supply voltage range 8 to 35 VDC
• Current consumption 25 mA
• Problem solver for adhesive media
• Two adjustable switching outputs
• Output type PNP
• Baumer protect+ (IP68, IP69K)
• Process temperature -40 to + 115 Deg C
• 10 Bar process pressure
• G1/2 A hygienic
• EPDM sealing
• Process connection material AISI 316 L
• M12-A, 4 Pin, stainless steel KingCrown (with LED)
• Step response tine <150 ms
• Suitable for use in open tanks
• Factory settings
• 360° visible multicolour LED
• IO-Link interface version 1.1
• Wetted parts material – PEEK
• Surface roughness of wetted parts Ra<0.8 um
• Hygiene Compliance 3-A (74-07), EHEDG EL Class I, FDA (21 CFR 177.2415)
• Safety Compliance cULus Listed, E365692
• Ideal for a wide range of application including Food and Bev, automotive, industrial